Chiprian L3 Managed Switch by PROXEET
Designed and assembled in Cyprus by Proxeet Ltd.

L3 switches with non-blocking architecture

Enterprise-grade switching built for ISPs and SMBs. Passive or active cooling options, flexible PoE profiles (incl. 24V/48V passive), and your choice of open-source or proprietary OS.

⚠️ 2-year warranty
⚡ PoE-af/at/bt options
Silent builds

Switching platform

16K MAC, 4K VLANs, 12 Mb packet buffer

L3 routing

IPv4/IPv6 unicast & multicast routing

Multicast

MLD, PIM, IGMP, MSDP

Non-blocking fabric

Wire-speed switching across all ports.

Security

ACL (L2, L3, L4), PortSec, 802.1X

QoS

Per-port and per-prio shaping; storm control

Technical Specifications

Key resources and Layer-3 capabilities. Values are profile-dependent where noted.

System and Switching Resources Value
Packet buffer size12 Mb
RAM size2 GB
ROM / eMMC storage8 GB
MAC address table16 K
ARP / Next-hop table1 K entries
VLANs4 K
L2 multicast port masks1 K
Router legs127
Multicast router leg mask1023
Super VCAP blocks6 (shared between LPM, ACL, QoS, and multicast)
Layer 3 Routing Capabilities Value
IPv4 unicast routes3072 per VCAP block; up to ≈ 18 K total (profile-dependent)
IPv6 unicast routes1024–1536 per VCAP block; up to ≈ 6–9 K total (profile-dependent)
IPv4 multicast routes (S,G or *,G)1536 per VCAP block; up to ≈ 9 K total (profile-dependent)
IPv6 multicast routes (S,G or *,G)512 per VCAP block; up to ≈ 3 K total (profile-dependent)
Reverse Path Forwarding (RPF)Supported
Maximum ECMP group sizeUp to 16 next-hop paths per group
Quality of Service (QoS) and Security Value
Ingress QoS mapping table1 K entries
Egress QoS mapping table2 K entries
Egress queues8 per port (1 priority queue)
Ingress virtual queues1 per priority per port
Ingress ACL (IS2)Up to 3 K (312-bit rules per allocated block)
Egress ACL (ES2)512 (312-bit rules)

Note: Capacities for routes, ACLs, and multicast groups are profile-dependent. VCAP (TCAM) resources are shared across LPM, ACL, QoS, and multicast; values reflect maximums achievable with appropriate profiles.

Products

Comparison table (A1 series)
Parameter Model
A1-16 A1-16P A1-24 A1-24P
1GE RJ4516162424
10GE SFP+2222
PoE Type
802.3af/at
Passive PoE 24&48v
802.3 af/at/bt
Passive PoE 24&48v
PoE Ports 802.3af/at824
PoE Ports 802.3bt (type 4)8
Passive 48v 2 pairs PoE Ports824
Passive 48v 4 pairs PoE Ports8
Passive 24v 2 pairs PoE Ports88
PoE Budget per Port
30Wt (802.3af/at/Passive)
30Wt (802.3af/at/Passive)
90Wt (802.3bt/Passive 4pairs)
Total PoE Budget150Watt370Watt
ConsoleUSB-CUSB-CUSB-CUSB-C
CoolingFanlessActive (rear-to-front airflow)FanlessActive (rear-to-front airflow)
AC Power
AC: 90–260 V
50–60 Hz
AC: 90–260 V
50–60 Hz
AC: 90–260 V
50–60 Hz
AC: 90–260 V
50–60 Hz
Dimensions (H × W × D)4.37 × 48.26 × 25 cm4.37 × 48.26 × 25 cm4.37 × 48.26 × 25 cm4.37 × 48.26 × 25 cm
Weight4 kg (max)4 kg (max)4 kg (max)4 kg (max)

Notes: (1) values are illustrative; align with the sw-models sheet if needed. (2) All models with the “P” index use active cooling only.

Choose your OS

Open-source build for enthusiasts or proprietary OS for enterprises. Same hardware, tailored software experience.

Open-source
OpenWrt-based

  • Root access & SDK
  • Community tooling
  • Traffic Control (tc) via CLI, with hardware offload where supported
  • User is free to modify the system at their own risk

Proprietary OS
PxSW

  • Industry-standard CLI
  • Advanced Web UI
  • RBAC with RADIUS/TACACS+
  • Secure Boot
  • SNMP v3 & Syslog

Part Number Structure

Each product is defined by a structured part number representing its configuration.

ASwitching Level
B02Power Unit
S10G02Uplinks
E01G24Access Ports
A24B08P08PoE
PX/DC/LOptions

Switching Level

  • A – Access level
  • D – Distribution level
  • C – Core level

Power Unit Type

  • B – Built-in PSU
  • H – Hot-swap PSU
  • 01…02 – Quantity

Uplink Ports

  • S – SFP/SFP+/SFP25
  • 10G – Speed
  • 02 – Quantity

Access Ports

  • E – Ethernet
  • 01G – Speed
  • 16 / 24 – Quantity

PoE Availability

  • A – AF/AT
  • B – BT
  • P – Passive 24V

Additional Options

  • PX – PxSW management OS
  • OW – OpenWRT-based build
  • DC – External DC input port
  • L – Integrated cellular modem

Example: A-B02-S10G02-E01G24-A24B08P08-PX/DC/L
Access-level switch with two built-in power supplies, two 10G SFP+ uplinks, 24× 1G Ethernet ports, 24× PoE AF/AT outputs, 8× BT ports, 8× passive 24V, managed by PxSW, equipped with DC-in and integrated cellular modem.

Feature Deep-Dive for PxSW

Explore advanced Layer-2 and Layer-3 capabilities available exclusively in the proprietary PxSW platform.

Interface Functions
  • Head-of-Line (HOL) blocking protection
  • Back pressure support
  • Auto MDI/MDIX support
  • Port status and state management/monitoring
  • Jumbo frame support (up to 10,240 bytes)
  • Flow control (IEEE 802.3x)
  • IEEE 802.1Qbb per-priority flow control (PFC)
  • Port mirroring (SPAN, RSPAN)
  • PoE AF/AT (model dependent)
  • PoE BT up to 90 W per port (model dependent)
  • Passive PoE 48 V / 24 V (model dependent)
  • Hot-swappable SFP detection
  • IEEE 802.3ap 10G-KR
MAC Address Features
  • Independent learning per VLAN
  • MAC multicast support
  • Adjustable MAC address aging time
  • Static MAC entries
  • MAC flapping event logging
VLAN Support
  • IEEE 802.1Q support
  • VLAN trunking
  • Q-in-Q support
  • IEEE 802.1ad provider bridge (native or translated VLAN)
  • GVRP, MVRP
  • Bidirectional VLAN translation
  • Unidirectional VLAN translation
  • Static private VLANs
  • MAC-based VLAN
  • Protocol-based VLAN
  • IP subnet-based VLAN
  • Voice VLAN support
L2 Features
  • STP (Spanning Tree Protocol, IEEE 802.1D) support
  • RSTP (Rapid Spanning Tree Protocol, IEEE 802.1W) support
  • MSTP (Multiple Spanning Tree Protocol, IEEE 802.1S) support
  • Spanning Tree Fast Link option support
  • STP Root Guard support
  • BPDU filtering support
  • STP BPDU Guard support
  • Loopback detection support
L3 Features
  • IPv4/IPv6 static routes
  • Dynamic routing protocols: RIPv2, OSPFv2, OSPFv3
  • Address Resolution Protocol (ARP)
  • Proxy ARP support
Multicast
  • Multicast profile support
  • Static multicast group support
  • IGMP snooping v1, v2, v3 support
  • IGMP snooping fast leave support (host/port based)
  • PIM snooping support
  • IGMP proxy-report support
  • IGMP authentication via RADIUS support
  • MLD snooping v1, v2 support
  • IGMP querier support
  • MVR support
  • PIM-SM, PIM-DM, IGMP Proxy, MSDP
Link Aggregation Features
  • LAG group creation
  • Link aggregation using LACP
  • LAG balancing algorithm support
IPv6 Support
  • IPv6 host functionality
  • IPv4/IPv6 coexistence
QoS
  • QoS statistics
  • Port rate limiting (shaping, policing)
  • 802.1p CoS support
  • Storm control for broadcast, multicast, unknown unicast traffic
  • Bandwidth management
  • Strict Priority / Weighted / Round Robin (WRR)
  • CoS/DSCP marking based on ACL
  • VLAN marking based on ACL
  • 802.1p priority configuration for management VLAN
  • DSCP-to-CoS / CoS-to-DSCP remarking
  • 802.1p/DSCP marking for IGMP protocol
Security & ACL
  • DHCP snooping (unauthorized DHCP server protection)
  • DHCP Option 82
  • IP Source Guard
  • Dynamic ARP Inspection
  • First Hop Security
  • sFlow support
  • MAC-based authentication, MAC limiting, static MAC entries (Port Security)
  • 802.1X port-based authentication
  • Guest VLAN
  • DHCP client filtering
  • BPDU attack prevention
  • L2–L3–L4 ACL on the switch
  • Time-based ACL support
  • IPv6 ACL
  • ACL based on switch port
  • ACL based on 802.1p priority
  • ACL based on VLAN ID
  • ACL based on EtherType
  • ACL based on DSCP
  • ACL based on protocol type
  • ACL based on TCP/UDP port number
  • ACL based on user-defined packet content (user-defined bytes)
Management Functions
  • Configuration file upload/download via FTP
  • Configuration file upload/download via web interface
  • SNMP protocol
  • Command line interface (CLI)
  • Web interface
  • Syslog
  • NTP (Network Time Protocol)
  • Traceroute
  • LLDP (802.1ab) + LLDP-MED
  • Command authorization via TACACS+ server
  • Switch access control — user privilege levels
  • Management interface lock
  • Local authentication
  • IP address filtering for SNMP
  • RADIUS, TACACS+ client
  • SSH client, Telnet client
  • SSL support
  • Command logging
  • System log
  • DHCP auto-configuration
  • DHCP relay (Option 82)
  • DHCP Option 12
  • Debug commands
  • CPU-bound traffic limiting mechanism
  • Password encryption
  • Ping (IPv4/IPv6 support)
Service Features
  • Virtual Cable Testing (VCT)
  • Optical Transceiver Diagnostics
Monitoring Features
  • Interface statistics
  • CPU load monitoring
  • Temperature monitoring

Tell Us About Your Task

We will help you find the optimal solution for your network. Please leave your contact details and a brief description of your task.